Aerostar Filters, made by Filtration Group, must be purchased in packages of 12 for 1" and 2" depth and packages of 6 for 4" depth. Prices shown are for cases of 12.

These carbon slurry pleated filters are designed for the control of intermittent odor problems. Carbon slurry pleated filters remove a wide range of odors and common indoor air pollutants such as food odors, paint fumes, and ozone. Constructed with a water resistant board and pleated to provide the maximum effective area, carbon slurry pleated filters are suitable for use in light duty commercial applications.

Benefits:

In some light duty applications, carbon slurry pleated filters can be effective as a long-term solution for controlling odor problems. Carbon slurry pleated filters can be used as a low cost method to verify the potential effectiveness of carbon for controlling an odor problem.

Applications:

The carbon slurry pleated filter is well suited for use where molecular contaminant concentrations are low and/or intermittent.

The carbon slurry pleated filters are well suited for use in air make-up and re-circulation applications in office buildings, hospitals, airports, food courts, and manufacturing facilities.

Many sizes are available. Must be purchased in quantities of 6 or 12 depending on size of filter. Prices range from $9 to $45.42 for each filter depending on size.

Technical Specifications:

Filter pressure drop should not exceed 0.22 "w.g. at 500 fpm for 2" deep filters or 0.24 "w.g. at 500 fpm for 4" deep filters. The carbon slurry coated media shall have 11 grams of activated carbon per squre foot of media. MERV 6 rated for particle efficiency. Sizes available from 10 x 10 x 1 up to 24 x 24 x 4. Too many to list, please call us! Must be ordered in case lot quantities.